Skoda Yeti Owner's Manual page 219

Hide thumbs Also See for Yeti:
Table of Contents

Advertisement

Raising the vehicle
Fig. 171 Attach lifting jack
First read and observe the introductory information and safety warn-
ings
on page 214.
Position the lifting jack by selecting the jacking point that is closest to the faulty
wheel
» Fig.
170. The jacking point is located directly below the marking on the
plastic cover of the lower sill.
Position the lifting jack below the jacking point and move it up until its claw is
positioned directly below the vertical web of the lower sill.
Align the lifting jack so that its claw grasps the web
marking.
Ensure that the entire surface of the lifting jack base plate rests on level ground
and is located in a vertical position to the area
the web.
Continue turning up the jack until the wheel is just about lifted off the ground.
Fig. 170
Changing a wheel: Jacking points
for positioning lifting jack
» Fig. 171
-  under the
» Fig. 171
where the claw grasps
Securing wheels against theft
First read and observe the introductory information and safety warn-
ings
on page 214.
The anti-theft wheel bolts on vehicles fitted with them (one anti-theft wheel bolt
per wheel) can only be loosened or tighten up by using the adapter provided.
Pull off the full wheel trim from the wheel rim or the cap from the anti-theft
wheel bolt.
Insert the adapter
» Fig. 172
B
ing of the safety wheel bolt
jutting out.
Push the wheel wrench onto the adapter
Loosen or tighten the wheel bolt
After removing the adapter, reinstall the full wheel trim or place the cap onto
the anti-theft wheel bolt.
Have the tightening torque checked with a torque wrench as soon as possible.
It is advisable to make a note of the code number hammered into the rear side of
the adapter or the rear side of the anti-theft wheel bolt. This number can be used
to purchase a replacement adapter from ŠKODA Original Parts if necessary.
We recommend that you always carry the adapter for the wheel bolts with you in
the vehicle. It should be stowed in the vehicle tool kit.
Fig. 172
Principle sketch: Anti-theft
wheel bolt with adapter
with its toothed side fully into the inner tooth-
until the stop so that only the outer hexagon is
A
up to the stop.
B
» page
216.
Emergency equipment and self-help
217

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents