Skoda Yeti Owner's Manual page 196

Opening and closing the bonnet
Fig. 151 Bonnet/radiator grille release lever: Release lever

First read and observe the introductory information and safety warn-
ings on page 192.
Opening
›
Pull the release lever under the dash panel
Before opening the bonnet, ensure that the arms of the windscreen wipers are
correctly in place against the windscreen otherwise the paintwork could be dam-
aged.
›
Press the release lever in the direction of the arrow
is unlocked.
›
Grab hold of the bonnet and lift.
›
Take the bonnet support out of its holder in direction of arrow
the opened bonnet by inserting the end of the support in the opening
signed for it » Fig. 152.
194
General Maintenance
Fig. 152
Securing the bonnet with the
bonnet support
» Fig. 151.
1
» Fig. 151 and the bonnet
2
and secure
3
de-
4
Closing
›
Lift the bonnet slightly and unhook the bonnet support. Press the bonnet sup-
port into the holder designed to hold it.
›
Let the bonnet drop into the lock carrier lock from a height of around 20 cm – do
not push it in.
›
Check that the bonnet is closed properly.
Engine compartment overview
Fig. 153 Principle sketch: Engine compartment

First read and observe the introductory information and safety warn-
ings on page 192.
Coolant expansion reservoir
1
Windscreen washer fluid reservoir
2
Engine oil filler opening
3
Engine oil dipstick
4
Brake fluid reservoir
5
Battery (below a cover)
6
Note
The location of the inspection points in the engine compartment of petrol and
diesel engines is practically identical.

199
195
197
197
200
200
