Skoda Yeti Owner's Manual page 231

Headlights
Fig. 180 Headlights: Removing the bulb arrangement/fixture for the park-
ing light (Xenon headlight)
Fig. 181 Removing the bulb arrangement/fixture for the parking light (Halo-
gen headlight)

First read and observe the introductory information and safety warn-
ings on page 228.
Overview of the location of the bulbs
- Fog lights and daytime running lights
A
- Parking lights (Xenon headlight)
B
- Parking lights (halogen headlight), low beam lights and main beam lights
C
Replacing the bulb for the side light (Halogen headlights)
›
Turn the rubber cover in the direction of arrow
›
Remove the fixture in the direction of arrow
» Fig. 180.
OPEN » Fig. 181 and remove.
1
» Fig. 181.
2
›
Remove the faulty bulb from the holder and insert a new one.
›
Insert the rubber cover.
Replacing the bulb for the side light (Xenon headlights)
›
Remove the rubber cover » Fig.
B
›
Remove the fixture in the direction of arrow
›
Remove the faulty bulb from the holder and insert a new one.
›
Insert the rubber cover.
High and low beams

First read and observe the introductory information and safety warn-
ings on page 228.
Change light bulb for main beam light and low beam light
›
Turn the rubber cover in the direction of arrow
and remove.
›
Disconnect plug » Fig. 182.
A
›
Press the circlips down until they are released from the secured position.
B
›
Remove the light bulb and insert a new light bulb in such a way that the fix-
C
ing lugs of the light bulb socket fit into the recesses at the reflector.
Installation is carried out in the reverse order.
180.
» Fig. 180.
3
Fig. 182
Removing the light bulb for main
beam light and low beam light
OPEN » Fig. 181 on page 229
1
Fuses and light bulbs


229