Skoda Yeti Owner's Manual page 155

Checking proper attachment

First read and observe the introductory information and safety warn-
ings on page 150.
Check that the tow bar is fitted properly before each use.
Check the following points.
The tow bar does not come out of the mounting recess even after heavy

"shaking".
The green marking » Fig. 130
 A
box on the tow bar.
The handwheel lies flush with the tow bar - there is no gap.

The cover is attached to the locked handwheel lock.
 B
WARNING
Do not use the towing device unless the tow bar has been properly locked!
Fig. 130
Check that the tow bar is attach-
ed properly
on the handwheel is located in the green
Removing the tow bar
Fig. 131 Removing the lock cover/releasing the lock
Fig. 132 Removing the two bar/placing the cover on the rear bumper

 First read and observe the introductory information and safety warn-
ings on page 150.
›
Remover the cover from the handwheel lock in the direction of the arrow
A
1» Fig. 131.
›
Release the handwheel lock by turning the key
of the arrow 2 to the stop.
›
Grip the tow bar from underneath and use your other hand to pull the hand-
wheel C » Fig. 132 in the direction of the arrow 3.
›
Turn the handwheel in the direction of the arrow 4 to the stop, and hold in this
position.
›
Remove the tow bar from the mounting recess downwards and in the direction
of the arrow 5.
to the right in the direction
B

153
Towing a trailer