Suspensions
- Remove the 5 bolts of the wheel and remove
Refitting the rear wheel
To fit, follow the removal steps but in the reverse
sequence, being careful to fit the spacers on the
wheel axle as shown in the photograph.
Locking torques (N*m)
Muffler arm clamping screws
axle nut
Shock absorber-crankcase at-
104 ÷ 126
tachment bracket
20 ÷ 25
clamping screw
33 ÷ 41 Nm
fixing screws
25 ÷ 30 Nm
Swing-arm
Removal
- Place the scooter on its centre stand;
- Remove the swinging arm/engine fitting shown in
the photo
- Move the engine back
SUSP - 216
Rear wheel
27 ÷ 30
Lower shock absorber
Rear brake calliper
MSS Nexus 300 i.e. E3 ( 2008)