Gilera 2008 MSS Nexus User Manual page 45

MSS Nexus 300 i.e. E3 ( 2008)
Replacement
Change oil and replace filter as indicated in the
scheduled maintenance table. Empty the engine
by draining the oil through drainage plug «B».
To facilitate oil drainage, loosen the cap/dipstick
«A».
Once all the oil has drained through the drainage
hole, unscrew and remove the oil cartridge filter
«C ».
Make sure the pre-filter and drainage plug O-rings
are in good conditions.
Lubricate them and refit the mesh filter and oil
drainage plug, screwing them up to the specified
torque.
Refit the new cartridge filter being careful to lubri-
cate the O-ring before fitting it.
Change the engine oil.
Since a certain quantity of oil still remains in the
circuit, engine oil must be added through plug
«A». Then start the scooter, leave it running for a
Maintenance
MAIN - 45