Passenger Footrest - Gilera 2008 MSS Nexus User Manual

Chassis
- Using a jointed wrench between the helmet com-
partment and the chassis pipes, loosen the two
rear fixing nuts and then disconnect the light stud
bolts from the support extensions.
- Remove the light and disconnect the bulb holder
by turning it through 30° in anticlockwise direction.
To remove the rear light assembly, proceed as fol-
lows:
- Remove the rear upper central cover.
- Remove the handgrips and the upper side fair-
ings.
- Undo and remove the central screw.
- Using a jointed wrench between the helmet com-
partment and the chassis pipes, loosen the two
rear fixing nuts and then disconnect the light stud
bolts from the support extensions.
- Remove the light and disconnect the bulb holder
by turning it through 30° in anticlockwise direction.
Footrest
The footrest comprises a right and left footrest, a passenger footrest and a rider footrest. The whole
procedure is described below:

PASSENGER FOOTREST:

- Remove the side fairings.
- Unscrew the nut «A» from both vehicle sides and
release the footrests.
CHAS - 256
MSS Nexus 300 i.e. E3 ( 2008)