Rear Mudguard - Gilera 2008 MSS Nexus User Manual

Chassis
- Remove the three screws indicated in the figure.
License plate holder
- Remove the rear lower central cover.
- Remove the four fixing screws (two per side) and
disconnect the electric connectors.
- To access the license plate light bulb, remove the
two fixing screws of the support rear cover and ex-
tract the complete bulb holder.

Rear mudguard

To remove the rear mudguard, proceed as follows:
- From the right side of the vehicle, undo the screw
«A».
CHAS - 260
MSS Nexus 300 i.e. E3 ( 2008)