Gilera 2008 MSS Nexus User Manual page 93

MSS Nexus 300 i.e. E3 ( 2008)
CAUTION: SHOULD IT BE NECESSARY TO REMOVE ONLY THE MUFFLER TIP, ALWAYS RE-
PLACE THE GRAPHITE GASKET BETWEEN STUB AND TIP.
Removal of the engine from the vehicle
CAUTION
SUPPORT THE SCOOTER ADEQUATELY.
Disconnect the battery.
- Remove the side fairings.
- Remove the helmet compartment.
Remove the full muffler unit.
- Remove the air filter.
- Release the blow-by return pipe from the clamp
and disconnect it from the head.
CAUTION
THIS OPERATION MUST BE CARRIED OUT WHEN THE
ENGINE IS COLD.
- Remove the rear brake calliper and release the
rear brake piping from the four clamps of the en-
gine.
- Get a + 2 l container in order to collect the coolant
and place it under the vehicle.
- Remove the pipe that feeds coolant into the pump
as shown in the photograph and then empty the
system.
- Remove the engine coolant outlet pipe as indi-
cated.
Engine from vehicle
ENG VE - 93