Gilera 2008 MSS Nexus User Manual page 214

Suspensions
Refitting
STEERING FIFTH WHEEL TRACK FITTING
- Thoroughly clean the track seats on the head-
stock and the steering tube.
- Fit the new tracks of the headstock with the spe-
cific tool.
- Screw the nut until the tracks are fully inserted.
N.B.
LUBRICATE THE STEERING FIFTH WHEEL TRACKS WITH
RECOMMENDED GREASE BEFORE USE.
Specific tooling
001330Y Tool for fitting steering seats
Recommended products
AGIP GREASE PV2 Grease for steering bear-
ings, bolt seatings for swinging arms and fay-
ing surface of driven pulley spring (only pulley
side)
Soap-based lithium and zinc oxide grease con-
taining NLGI 2; ISO-L-XBCIB2
- Fit the lower fifth wheel seat on the steering tube.
- Using the specific tool, fit the lower fifth wheel
seat on the steering tube.
N.B.
LUBRICATE THE STEERING FIFTH WHEEL TRACKS WITH
RECOMMENDED GREASE BEFORE USE.
Specific tooling
020459Y Punch for fitting bearing on steering
tube
Recommended products
AGIP GREASE PV2 Grease for steering bear-
ings, bolt seatings for swinging arms and fay-
SUSP - 214
MSS Nexus 300 i.e. E3 ( 2008)