Gilera 2008 MSS Nexus User Manual page 92

Engine from vehicle
Questa sezione descrive le operazioni da effettuare per lo smontaggio del motore dal veicolo.
Exhaust assy. Removal
- Remove the Lambda probe from its support and
disconnect it.
- Remove the retainer clamp.
- Undo the two exhaust manifold fixings on the
head. To unscrew the nuts that fix the muffler
flange to the head properly, use a jointed wrench
that allows, according to the travel direction, to get
also at the right nut. That is difficult to do with a
traditional straight wrench.
- Undo the three screws that fix the muffler to the
support arm.
- Remove the full muffler unit.
Remove the lambda probe from the manifold.
ENG VE - 92
MSS Nexus 300 i.e. E3 ( 2008)