Maintenance
Air filter
Proceed as follows:
1. Unscrew the 9 fixing screws «A»;
CAUTION
IF THE VEHICLE IS USED ON DUSTY ROADS, IT IS NEC-
ESSARY TO SERVICE THE AIR FILTER MORE OFTEN TO
AVOID DAMAGING THE ENGINE.
1. Wash the sponge with water and neutral soap.
2. Dry it with a clean cloth and small blasts of compressed air.
3. Impregnate the sponge with a mixture of 50% petrol and 50% specified oil.
4. Gently squeeze the filter element, let it drip and then refit it.
CAUTION
IF THE VEHICLE IS USED ON DUSTY ROADS, IT IS NECESSARY TO SERVICE THE AIR FILTER
MORE OFTEN TO AVOID DAMAGING THE ENGINE.
Recommended products
AGIP FILTER OIL Oil for air filter sponge
Mineral oil with specific additives for increased adhesiveness
Engine oil
In 4T engines, the engine oil is used to lubricate the distribution elements, the bench bearings and the
thermal group. An insufficient quantity of oil can cause serious damage to the engine.
In all 4T engines, the deterioration of the oil characteristics, or a certain consumption should be con-
sidered normal, especially if during the run-in period. Consumption levels in particular can be influenced
by the conditions of use (e.g.: oil consumption increases when driving at "full throttle".
MAIN - 44
2. Remove the air filter«B»
MSS Nexus 300 i.e. E3 ( 2008)