Removing The Starter Motor - Gilera 2008 MSS Nexus User Manual

MSS Nexus 300 i.e. E3 ( 2008)

Removing the starter motor

- Remove the two screws indicated in the figure.
- Take the starter motor out of its seat
Removing the flywheel magneto
- Remove the water pump shaft and crankshaft
spline clip
- Line up the two holes in the flywheel as shown in
the photo
- Screw in the guide bushing that is part of the
special flywheel stop tool on the flywheel as shown
in the photo.
Engine
ENG - 121