Central Tunnel - Gilera 2008 MSS Nexus User Manual

Chassis
Headlight assy.
- Remove the centre cover of the shield.
- Remove the 4 front retainers of the front light as-
semblies.
- To remove the right-hand light assembly, remove
the screw located near the cover of the expansion
tank.
- To remove the left-hand light assembly, remove
the screw located in the left-hand storage com-
partment.
Remove the light, disconnecting the electric con-
nector from the light and the complete lamp holder
of the position light.
N.B.
THE TWO REAR ADJUSTMENT SCREWS SHOWN IN THE
FIGURE ARE ADJUSTED DURING ASSEMBLY OF THE
LIGHT AND MUST NOT BE ALTERED.
Frame central cover
The chassis central cover has a central tunnel and two side fairings, the procedure is the following:

CENTRAL TUNNEL:

CHAS - 246
MSS Nexus 300 i.e. E3 ( 2008)