Chassis
- Undo and remove the two screws «B» and the
four screws «C».
- Remove the frame sliding it from the tongues.
FRONT TURN INDICATORS:
- Undo and remove the three screws indicated.
- Disconnect the front turn indicator connector.
- Undo and remove the three screws to remove the
bulb holder from the support.
FRONT SHIELD:
- Remove the front lower frame.
- Remove the front upper frame.
- Remove the front headlight assemblies.
- Remove the instrument panel (see SHIELD BACK PLATE).
- Remove the lower shield back plate (see SHIELD BACK PLATE).
CHAS - 250
MSS Nexus 300 i.e. E3 ( 2008)