Gilera 2008 MSS Nexus User Manual page 261

MSS Nexus 300 i.e. E3 ( 2008)
- From the left side of the vehicle, undo the two
screws «B».
- Remove the rear mudguard.
Helmet bay
To remove the helmet compartment, proceed as follows:
- Remove the saddle.
- Remove the battery.
- Remove the rear upper central cover.
- Remove the handgrips and top side fairings.
- Working from both vehicle sides, undo the three
screws «A» and the screw «B».
- Undo and remove the two screws «C» from the
battery compartment.
- Lift the helmet compartment from the rear side
and remove the saddle lock.
- Disconnect the connectors of the power socket and the under seat light.
- Remove the plug socket due to the interference with the chassis.
- Remove the fuse box releasing the side hook teeth.
- Remove the complete helmet compartment.
Chassis
CHAS - 261