MSS Nexus 300 i.e. E3 ( 2008)
Specification
Cam shaft check: Minimum admissible diameter
-Using a gauge, measure the cam height.
Specification
Cam shaft check: Standard height
Cam shaft check: Standard height
Check the axial clearance of the camshaft
Specification
Cam shaft check: Standard axial clearance:
Cam shaft check: Maximum admissible axial clearance
- Measure the outside diameter of the rocking lever pins
- Check the rocking lever pins do not show signs of wear or scoring.
- Measure the inside diameter of each rocking lever.
S
TANDARD HEIGHT
C
AMSHAFT AXIAL CLEARANCE
Desc./Quantity
Bearing B diameter: 19.950 mm
Desc./Quantity
Inlet: 30.285 mm
Outlet: 29.209 mm
Desc./Quantity
0.11 - 0.41 mm
0.42 mm
Characteristics
CHAR - 25