Gilera 2008 MSS Nexus User Manual page 244

Chassis
This section è is devoted to the operations that can be carried out on the vehicle's bodywork.
Seat
- Remove the two clamping screws on the frame.
- Remove the control button of the undersaddle
light.
Rear handlebar cover
- Release the three retaining tabs of the rear han-
dlebar cover shown in the figure using a screw-
driver and paying attention not to damage the
paintwork.
- Remove the five fixing screws from the rear han-
dlebar cover.
- Remove the rear cover.
N.B.
WHEN INSTALLING, THE CENTRE SCREW IS A METAL
SCREW, THE OTHER 4 ARE PLASTIC.
CHAS - 244
MSS Nexus 300 i.e. E3 ( 2008)