Gilera 2008 MSS Nexus User Manual page 96

Engine from vehicle
When refitting the engine onto the scooter, carry
out the removal operations but in reverse order
and respect the tightening torques shown in the
Specifications Chapter.
- Check the engine oil level and if necessary, top
it up with the recommended type.
- Fill and bleed the cooling circuit.
- Check accelerator and electric devices for correct
functioning.
CAUTION
PAY PARTICULAR ATTENTION TO POSITIONING THE
THROTTLE CONTROL TRANSMISSION PROPERLY.
Upon refitting the engine onto the scooter, carry
out the removal operations but in reverse order
and respect the tightening torques shown in the
«Specifications» Chapter.
- Check that there is a small clearance when the
valve is in abutment against the set screw.
-Check the engine oil level and if necessary, top it
up with the recommended type.
- Fill and bleed the cooling circuit.
- Check accelerator and electrical devices func-
tioning.
- Pay particular attention to the sleeve, be careful
to position the throttle body reference marks as in-
dicated in the photograph.
CAUTION
PAY PARTICULAR ATTENTION TO POSITIONING THE
THROTTLE CONTROL TRANSMISSION PROPERLY.
ENG VE - 96
MSS Nexus 300 i.e. E3 ( 2008)