Gilera 2008 MSS Nexus User Manual page 251

MSS Nexus 300 i.e. E3 ( 2008)
- Remove the hand guards unscrewing, from both
sides, the two screws «A» collecting the washers
and the screw «B».
- Undo the central screw.
- Undo the two screws indicated.
- Undo the rider footrest fixing screw «C» and the
spoiler fixing screw «D».
- Remove the front shield releasing the different
cable harness from the clamps.
To refit follow the reverse order paying attention to fasten the cable harness with the relative clamps.
Knee-guard
The shield back plate is made by two sections. The instrument panel, with instrument unit and lower
shield back plate. The procedure for both is described below:
Chassis
CHAS - 251