Gilera 2008 MSS Nexus User Manual page 265

MSS Nexus 300 i.e. E3 ( 2008)
To remove the windshield supports, proceed as
follows:
- Remove the caps and the gaskets on the two
windshield supports.
- Remove the FRONT UPPER FRAME.
- Working from both vehicle sides, undo and re-
move the two screws «A».
- Remove the supports.
Pilot lights kit
- Remove the front handlebar cover.
- Remove the three screws shown in the figure,
then slide off the complete unit from the front han-
dlebar cover.
Battery
- Remove the elastic strap and the battery cover.
Chassis
CHAS - 265