Platen Assembly - OKIDATA ML320 Service Manual

3.2.19 Platen Assembly

Perform these procedures first:
- 3.2.01 ( )
- 3.2.02 ( )
- 3.2.04 ( )
- Push the release lever (1) to the rear of the printer.
- Pull the platen lock levers (2) in the direction of arrow A.
- Rotate the lock levers in the direction of arrow B. This releases the platen assembly
(3) from the chassis.
- Lift and remove the platen assembly.
NOTES:
Installation
- Before installation, turn the bias gear (4) towards the front of the printer as far
as it will go.
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
Page: 66