Platen Assy - OKIDATA ML320 Turbo Service Manual

3.3.11 Platen Assy

(1) Remove the printhead
(2) Remove the upper cover
(3) Remove the pull-up roller Assy
(4) Remove the ribbon protector
(5) Turn the change lever 1 to the bottom position.
(6) Push in the lock levers 2 on both sides to unlock the Assy from the frame, then rotate them upward
90°.
(7) Remove the platen Assy 4 from the base frame.
(8) To install, follow the removal steps in reverse order.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide ML320/321Turbo
(see 3.3.1 ).
(see 3.3.1 ).
(see 3.3.3 ).
(see 3.3.2 ).
Chapter 3 Parts Replacement
Page: 35