Guide Rail - OKIDATA ML320 Service Manual

3.2.18 Guide Rail

Perform these procedures first:
- 3.2.01 ( )
- 3.2.04 ( )
- 3.2.14 ( )
- 3.2.15 ( ).
- Pull the adjusting cam (1) out and rotate it to the horizontal position.
- Release the adjusting cam from the guide (2) in the chassis and remove the cam.
- Push the claw (3) in the direction of arrow A to disengage the guide rail (4) at position B.
- Pull the guide rail in the direction of arrow C to release it from the guide (5) in the chassis.
- Lift and remove the guide rail.
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
Page: 65