Ricoh SCRIPT2 Setup Manual page 61

H
Click [Browse].
Note
❒ The Windows NT 4.0 printer driver is in the following folder in the CD-
ROM:
\DRIVERS\RPS2\NT4\(Language)\
I
In the box, double-click [DRIVERS], [RPS2] and [NT4]. Then double-click the
folder of the appropriate language. Finally, click [Open].
J
Click [OK].
A printer model selection dialog box appears.
K
Click the name of the printer you want to install, and then click [Next].
A dialog box for changing the printer name appears.
L
Change the name of the printer if you want, and then click [Next].
M
Click [Next].
N
In the next dialog box asking if you want to print a test page, select [No] and
then click [Finish].
The installer copies the printer driver files from the CD-ROM to the comput-
er's hard disk.
Note
❒ Print a test page after completing installation and restarting Windows.
O
If you are asked to insert the Windows NT 4.0 system disk, insert it in the
computer, and then click [OK].
P
If you are asked to provide the drive of the system disk, use the drive con-
taining the Windows NT 4.0 system disk.
Q
If you are asked to provide the location of the required file, select the ap-
propriate folder. The location of the appropriate folder may differ depend-
ing on the version of your operating system. The following is an example:
• Folder named [i386] on the Windows NT 4.0 system disk.
R
Restart the computer after installation is complete.
S
Set up any options with the printer driver.
Installing the RICOH-SCRIPT2 Printer Driver
4
49