Windows Nt 4.0 - Installing The Ipdl-C Printer Driver - Ricoh SCRIPT2 Setup Manual

Installing the Printer Driver and Software
D
From the [Option Tray:] and [Total Printer Memory:] boxes, select any options
you have installed.
Selecting the wrong tray here will make it impossible to use the tray correctly.
Selecting the wrong amount of memory here may cause printing problems.
Be sure to change this setting whenever you add more memory.
Note
❒ If the optional paper feed unit and the optional duplex unit are installed,
simply check the[Duplex] check box, and the paper feed unit will automat-
ically be selected in the[Option Tray:] box. Automatic duplex printing be-
comes possible with the printer.
Reference
You can confirm how much memory the printer is currently equipped
4
with by printing a configuration page. ⇒ "Printing the Configuration
Page" in the "Printer Reference" included as a PDF file on the CD-ROM
E
Click [OK].

Windows NT 4.0 - Installing the IPDL-C Printer Driver

Installing the printer driver
Install the driver in accordance with the steps explained. ⇒ P.37 "Installing by
Auto Run"
If you want to share the printer on Windows NT 4.0, use the [Sharing]tab in the
Printer Properties to specify the alternate printer driver. (For details, refer to the
instructions manual of the Windows 4.0.)
When prompted for the Windows 95/98/Me alternate driver location, select the
following folder in the CD-ROM.
\DRIVERS\IPDL-C\WIN9X_ME\DISK1\
Setting up options
Limitation
❒ Changing the printer settings requires Full Control access permission. Mem-
bers of the Administrators, Server Operators, Print Operators, and Power Us-
ers groups have Full Control permission by default. When you set up options,
log on under Full Control permission.
Note
❒ When setting up options, you should access the Printer Properties from Win-
dows. You cannot access the Printer Properties from an application.
40