Installing The Ricoh-Script2 Printer Driver; Windows 95/98/Me - Installing The Ricoh-Script2 Printer Driver - Ricoh SCRIPT2 Setup Manual

Installing the Printer Driver and Software

Installing the RICOH-SCRIPT2 Printer Driver

Windows 95/98/Me - Installing the RICOH-SCRIPT2 Printer Driver

With Windows 95/98/Me, you should install both the Windows 95/98/Me
PostScript printer driver and the PPD file.
Note
❒ Be sure to install the PPD file for Windows 95/98/Me. Do not accidentally in-
stall the PPD file for Windows 2000 or Windows NT 4.0.
Installing the printer driver
4
Preparation
The Windows 95/98 operating system CD-ROM or diskettes are required for
installing the printer driver.
The following procedure describes installation when the printer is connected
to the computer via a parallel interface.
A
Close all applications that are currently running.
B
Click [Start] on the taskbar, point to [Settings], and then click [Printers].
The [Printers] window appears.
C
Double-click the [Add Printer] icon.
[Add Printer Wizard] starts.
D
Click [Next].
E
Click [Local printer], and then click [Next].
A dialog box for selecting the printer manufacturer and model name appears.
F
Click [Have Disk].
A dialog box for installing a driver from a disk appears.
G
Press the { { { { SHIFT} } } } key and insert the CD-ROM into the CD-ROM drive.
Keep the { { { { SHIFT} } } } key pressed until the computer has finished accessing the
CD-ROM.
If the Auto Run program starts, click [Cancel].
42