Ricoh SCRIPT2 Setup Manual page 122

Table of Contents

Advertisement

Troubleshooting
Message
Open Rear Cover
Remove Misfeed
Paper Size Error
Paper Type Error
Remove Misfeed From Output
4
Tray
Remove Misfeed From Paper
Tray
Reset Cleaner
Correctly
Reset Fusing Unit Correctly
Reset PCU Correctly
Reset Paper Tray Correctly
Reset Transfer
Roller Correctly
Reset xxx Toner Correctly
Warming Up
Waste T Full
Waste Toner is Full
38
Description
There is a paper misfeed in the
printer.
There is a difference between
the paper size in the tray and
the requested paper size from
the computer.
There is a difference between
the paper type in the tray and
the requested paper type from
the computer.
There is a paper misfeed in the
printer.
There is a paper misfeed in the
printer.
The fuser cleaner roller is not
installed in the printer.
The fusing unit is not installed
in the printer.
The photoconductor unit is not
installed in the printer.
The paper tray is not installed
correctly.
The transfer roller is not in-
stalled correctly.
The indicated toner cartridge is
not installed in the printer.
The printer is warming up or
processing internally.
The waste toner bottle is full.
The waste toner bottle is full.
Comments
Remove the misfed paper.
⇒ P.56 "When the Message
"Open Rear Cover Remove
Misfeed" Appears"
Check if the correct paper is
set ⇒ P.29 "Loading Paper"
Check if the correct paper is
set ⇒ P.29 "Loading Paper"
Remove the misfed paper.
⇒ P.57 "When the Message
"Remove Misfeed From Out-
put Tray" Appears"
Remove the misfed paper.
⇒ P.54 "When the Message
"Remove Misfeed From Paper
Tray" Appears"
Install the fuser cleaner.⇒
P.76 "Replacing the Fuser
Cleaner"
Contact your sales or ser-
vice representative.
Install the photoconductor
unit. ⇒ P.68 "Replacing the
Photoconductor Unit"
Install the paper tray cor-
rectly.
Contact your sales or ser-
vice representative.
Install the indicated toner
cartridge.⇒ P.66 "Replacing
the Toner Cartridge"
Wait until the printer re-
turns to the ready condition
or finishes processing inter-
nally.
Replace the waste toner
bottle.⇒ P.75 "Replacing the
Waste Toner Bottle"
Replace the waste toner
bottle. ⇒ P.75 "Replacing the
Waste Toner Bottle"

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCRIPT2 and is the answer not in the manual?

Table of Contents