Configuring Windows Nt 4.0; Printing Without Using A Print Server - Ricoh SCRIPT2 Setup Manual

Configuring Windows NT 4.0

Printing Without Using a Print Server

The following procedure describes how to configure Windows NT 4.0 to use the
printer on a network without a Windows 2000 Server, Windows 2000 Profes-
sional, Windows NT Server, Windows NT Workstation or NetWare based print
server.
indicates topics explained in this document
1. Decide on the protocol to use
Consult your network administrator about which of the three protocols are appropriate.
TCP/IP
2. Configure the chosen protocol
"Configuring TCP/IP and IPP for Printing"
3. Select the appropriate software
If using TCP/IP ...
PortNavi
4. Install the software and set the printer driver port
"Using PortNavi"
3. Windows NT 4.0
Configuration
IPP
If u sin g IPP or N et BEUI ...
Multidirect Print
"Using Multidirect Print"
NetBEUI
"Configuring NetBEUI
for Printing"
31