Going To The Top Page - Ricoh SCRIPT2 Setup Manual

Appendix

Going to the Top Page

After launching the Web Browser, type the IP address of the printer. See the ex-
ample below. This example is for the English version.
http://192.168.15.16/
(In this example, the IP address of the Network Interface Board is 192.168.15.16.)
Note
❒ If a DNS server is used on the network, you can type the host name as an URL.
For example, http://webmonitor.netprinter.com/. In order to do this, you
must register the IP address and host name of the Network Interface Board
with the DNS server. Consult the network administrator for information
about how to do this.
❒ If the network uses proxy servers, the browser may run slowly.
6
1.
Header Buttons
You can register favorite URLs with
[URL]. To view the Help section, click
[Help].
Important
❒ It costs to use the browser to access
a website.
Note
❒ Help is stored in the following folder
on the CD-ROM in HTML format. The
third folder, "(Language)" may be sub-
stituted by an appropriate language
name.
\HELP\WSMHLP\(Language)\
76
3
2.
Menu Buttons
Buttons to configure the Network Inter-
face Board and confirm the status of the
printer.
Note
❒ When you click [Network Config], a dia-
log box appears requesting the user
name and password. Type only the
password in this dialog box. The fac-
tory default password is "password".
❒ The password is the same as that used
for remote maintenance and that used
in the NIB Setup Tool. If you change a
password with the Web Browser, the
other passwords are also changed.
3.
Status
Displays the name and comments of the
Network Interface Board, and the printer
status.
1
2