Ricoh SCRIPT2 Setup Manual page 22

Getting Started
C
Depress the printer's power switch to turn the printer on.
1
After the printer is turned on, it takes about four minutes to warm up before
being able to print. The following message appears on the operation panel.
IPDL-C
Warming Up
When the printer is turned on, the Power indicator will blink repeatedly.
Once it stops blinking and remains on, you will be able to send data from a
computer to the printer. When the following message appears on the opera-
tion panel, the printer will be able to begin printing.
IPDL-C
Ready
Turning off the printer
A
Confirm that the Data In and Error indicators are off.
Note
❒ The Data In indicator stays on when printing and blinks while receiving
data from the computer. Do not turn off the printer while it is printing or
receiving data.
❒ When the Error indicator lights up, a printer error has occurred. Confirm
the message that appears on the operation panel and troubleshoot the
problem. ⇒ "Error & Status Messages on the Operation Panel" in the
"Printer Reference" included as a PDF file on the CD-ROM
10
ZDGH080J