Ricoh SCRIPT2 Setup Manual page 123

Message
A3:Error
A6:Error
AB:Error
B0:Error
B1:Error
B3:Error
B5:Error
Description
There is too much data for the
I/O buffer to handle.
There is not enough printer
memory to print one or more of
the pages in the print job.
The printer is unable to process
the data you are trying to print.
An error has occurred in the
optional memory unit.
An error has occurred in the
standard parallel interface.
The printer setting is wrong.
An error has occurred in the
RICOH-SCRIPT2 module.
Error & Status Messages
Comments
Check if the interface cable
is inserted into the printer
and the computer securely.
Check if the interface cable
is damaged or broken.
Increase the size of the I/O
buffer. ⇒ P.79 "Using the
Operation Panel"
See P.114 "Low Memory".
Install optional memory
unit to increase the amount
of printer memory.
Reduce the amount of data
being sent to the printer.
Turn the printer off and on.
Then, try to print again.
Turn off the printer. Re-
move and reinstall the
memory unit and turn on
the printer. Then, try to
print again.
Turn off the printer. Re-
move the memory unit and
turn on the printer. Then,
try to print again.
Note
❒ In this case, you might
not be able print com-
plex print jobs.
Contact your sales or ser-
vice representative.
Reset the printer using
"Menu Reset" of the "Main-
tenance" menu. ⇒ P.79 "Us-
ing the Operation Panel"
Contact your sales or ser-
vice representative.
4
39