Ricoh SCRIPT2 Setup Manual page 285

N
Assign print queues to the created printer as follows.
A From [Print Server Configuration Menu], select [Queues Serviced By Printer].
B Select the printer created in step L L L L .
C Press the { { { { INSERT} } } } key to select a queue serviced by the printer.
Note
❒ You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the above steps, confirm that the queues are as-
signed.
O
Press the { { { { ESC} } } } key until "Exit?" appears, and select [Yes] to exit PCON-
SOLE.
P
Start the print server by typing the following from the console of the Net-
Ware Server.
If it is running, restart it after exiting it.
❖ ❖ ❖ ❖ To exit
CAREE: unload pserver
❖ ❖ ❖ ❖ To start
CAREE: load pserver print_server_name
Note
❒ If the printer works as configured, "Waiting for job" appears.
NetWare 3.x - Advanced Settings
4
59