Menu Structure; Overview Of The Device Settings Menu - Sartorius Cubis MCE32202P Operating Instructions Manual

Symbol Name
[Quantity]
[Invalid weight value] display
[Directional arrows] display
4.5

Menu Structure

4.5.1

Overview of the Device Settings Menu

Navigating in Menus (see Chapter 4.6, page 24).
t
Level 1 Level 2
SETUP BALANCE
Description
Indicates that a quantity is being displayed.
− Indicates that the display does not contain a weight value, rather it
is the calculated result of an application, e.g. for the "Totalizing"
application.
− For conformity-assessed devices: Indicates a fault. The cause of
this fault is displayed after pressing the [Change] key.
If leveling with the inclination sensor is active: Displays the direction
of rotation of the leveling foot.
Level 3 Description
AMBIENT Enter the ambient conditions at the device's
"Ambient installation site.
conditions"
APP FILT. − Equalize the load deviations in the display.
"Application filter" − The load deviations occur between the com-
STABIL. − Define the accuracy of the stability range.
"Stability range" − If the weight unit symbol appears, the weight
ST.DEL. − Define the duration of the stability delay.
"Stability delay" − The stability delay is used to bridge residual
ZERO/TAR. Define the trigger for zeroing and taring.
"Zeroing and taring"
AUTOZER. − Activate | deactivate automatic control of the
"Auto zero"
− The deviations of a set fraction of scale intervals
UNIT − Define the weight unit, e.g. grams, kilograms,
− Depending on the country-specific model ver-
− Some weight units may be blocked from use in
Operating Concept
plete placement of the sample on the weighing
pan and reaching the final result display.
readout is stable within the range indicated by
the stability range
fluctuations in the vibration of the device in
order to display reliable results.
zero display.
per second starting from the display zero point
are automatically zeroed.
pounds.
sion, not all weight units listed may be available.
conformity-assessed devices, depending on
national verification laws.
Operating Instructions Cubis MCE 19
®