8
The series ACT frequency inverters are suited for a wide range of applications. The
modular hardware and software structure enables customer-specific adaptation. The
available hardware functionality of the frequency inverter is displayed in the control
unit and the optional control software VPlus. The software parameters can be ad-
justed to meet the requirements of the specific application.
8.1
The
quency inverter. Information on the device type and the fabrication data (8-digit
number) are indicated. Additionally, the serial number is printed on the nameplate.
8.2
Modular extension of the hardware is possible via the plug-in slots. The
modules
the modules are displayed on the control unit and in the optional control software
VPlus after initialization. For the parameters required for the expansion module, refer
to the corresponding operating instructions.
8.3
The firmware stored in the frequency inverter defines the available parameters and
functions of the software. The software version is indicated in parameter
software version
the name plate of the frequency inverter.
8.4
As a protection against unauthorized access, the parameter
set such that anyone who wants to change parameters must enter this password be-
fore. A change of parameter is only possible if the password in entered correctly. If
the
the parameters. The previous password is deleted.
No.
84
84
Inverter Data
Serial Number
Serial Number
0 is entered on the nameplate during the fabrication of the fre-
Serial number
0 :
Nameplate:
Optional Modules
1 detected by the frequency inverter and the corresponding designations of
Inverter Software Version
12. In addition to the version, the 6-digit software key is printed on
Inverter software version
Nameplate:
Set Password
Set password
27 parameter is set to zero, no password is required for access to
Parameter
Description
27 Set Password
Operating Instructions ACTIVE
Operating Instructions ACTIVE
ACT 401 – 09 ; 04102013
Type: ACT 401 – 09 ; Serial No.: 04102013
CM-232 ; EM-IO-01
12 : 4.2.3
Version: 4.2.3 ; Software: 140 012
Min.
0
Optional
Inverter
Set password
27 can be
Settings
Max.
Fact. sett.
999
0
06/07
06/07