BONFIGLIOLI Act 201 Operating Instructions Manual page 167

Note:
This operation mode can be used, for example, for pressure or volumetric flow control
with linear operation behavior.
The minimum value monitoring prevents an acceleration of the drive if the actual
value is missing.
If the actual value is missing (< 0.5%) the output frequency is guided to the
mum frequency
If the actual value is available again, the controller continues operation automatically.
06/07
06/07
The parameterization of the technology controller in the individual data
sets enables an adaptation to various operating points of the application
with the data set change-over via control contacts.
Operation mode standard, parameter
418. This is done using the set
Operating Instructions ACTIVE
Operating Instructions ACTIVE
Operation Mode
440 = 1
Deceleration (clockwise)
Mini-
421.
165
165