BONFIGLIOLI Act 201 Operating Instructions Manual page 70

The CTRL menu branch can be accessed via the navigation
within the menu structure. The CtrL function contains sub-
functions which are displayed according to the operating point
of the frequency inverter.
Press the RUN key anywhere within the menu structure to
access the motor potentiometer function Pot
operation or Potr for anti-clockwise operation directly.
If the drive is running already, the display reads int
clockwise operation) / intr (reverse, anti-clockwise operation)
for the function internal reference value or inP
clockwise operation) / inPr (reverse, anti-clockwise operation)
for
"Motorpoti (KP)".
The function Motorpoti (KP) enables a link to other reference
value sources in the frequency reference value channel. The
function is described in Chapter "Motorpoti (KP)".
Motor potentiometer function Pot
Use the arrow keys to adjust the output frequency of the fre-
quency inverter from the
maximum frequency
factory settings (2 Hz/s) for parameter
Motorpoti
and
of low acceleration values.
Function Motorpoti (KP) inP
Use the arrow keys to adjust the output frequency of the fre-
quency inverter from the
Maximum Frequency
means of the control unit can be connected with further refer-
ence values via
chapter "Frequency Reference Channel" and "Motorpoti (KP)".)
Internal reference value int
The drive is in operation, i.e. output signals are present at the
frequency inverter and the current actual value is displayed.
Press an arrow key to switch to the motor potentiometer func-
tion Pot. The current frequency value is taken over in the mo-
tor potentiometer function Pot.
JOG frequency JOG
This function is useful for manual setup and positioning of a
machine. The frequency of the output signal is set to the en-
tered value if the FUN key is pressed.
•
•
•
•
•
68
68
419. The acceleration corresponds to the
473. The parameters
Deceleration (Clockwise)
419. The adjusted frequency value by
Reference Frequency Source
Press FUN key to switch from the internal reference value
int or the motor potentiometer function Pot to the pa-
JOG frequency
rameter
Keep the FUN key pressed and press the arrow keys to
adjust the required frequency.
(The frequency value last adjusted is saved as the
frequency 489
.)
Release the FUN key to stop the drive.
(The display returns to the previous function Pot or int or
to inP if function "Motorpoti (KP)" is active.)
Operating Instructions ACTIVE
Operating Instructions ACTIVE
. for clockwise
F
the
minimum frequency
418 to the
Ramp Keypad-
Acceleration (Clockwise)
421 are considered in the case
Minimum Frequency
475. (Refer to
489.
(foward,
F
(forward,
F
function
420
418 to the
JOG
06/07
06/07