Act 401 (75.0 Up To 132.0 Kw) - BONFIGLIOLI Act 201 Operating Instructions Manual

4.5
The frequency inverter is mounted in a vertical position on the assembly panel. The
following illustration shows the standard fitting.
The diameter of the assembly holes is 9 mm.
Assembly is done by screwing the back plate of the frequency inverter to the assembly
panel.
The dimensions of the device and the installation dimensions are those of the stan-
dard device without optional components and are given in millimeters.
Frequency inverter
75.0
Caution!
30
30

ACT 401 (75.0 up to 132.0 kW)

x
300 mm
b
x
a
x
x
300 mm
a1
Dimensions in mm
a
... 132.0 kW 510
Mount the devices with sufficient clearance to other components so that
the cooling air can circulate freely. Avoid soiling by grease and air pollu-
tion by dust, aggressive gases, etc.
Operating Instructions ACTIVE
Operating Instructions ACTIVE
Standard installation
c3
b1
b2
b3
Installation dimensions in mm
b c a1 b1
412 351 480 392
c
c1
c2
b2 b3 c1 c2
382 342 338 305
06/07
c3
110
06/07