Frequency Reference Channel - BONFIGLIOLI Act 201 Operating Instructions Manual

13.4
The various functions for the defining the reference frequency are connected via the
frequency reference value channel. The
the additive assignment of the available reference value sources depending on the
hardware installed.
10 -
11 - Abs. Value MFI1A + FF
20 - Abs. Value Motorpoti (MP)
21 - Abs. Value MFI1A + MP
30 -
31 - Abs. Val. MFI1A + F1
32 -
33 - Abs. Val. MFI1A + F3
40 - Abs. Value Motorpoti (KP)
41 - Abs. Value MFI1A + KP
80 -
81 -
82 -
89 -
90 -
91 -
92 -
99 -
101 to 199
1)
2)
114
114

Frequency Reference Channel

Reference frequency source
1 - Abs. Analog Value MFI1A
Abs. Val. Fixed Frequency
(FF)
Abs.Val. Speed Sensor 1
(F1)
Abs. Repetition Frequency
Input (F3)
Abs. Val.
MFI1A + FF + KP + F1 + F3
1)
+ (EM-S1INA)
Abs. Val.
MFI1A + FF + KP + F1 + F3
1)
+ (EM-S1INA)
Abs. Val.
MFI1A + FF + KP + F3
2)
+ (F2) + (EM-S1INA)
Abs. Val.
MFI1A + FF + KP + F1 + F3
2)
+ (F2) + (EM-S1INA)
Abs. Val. MFI1A + FF + MP
+ F3 + (EM-S1INA)
Abs. Val. MFI1A + FF + MP
+ F1 + F3+ (EM-S1INA)
Abs. Val. MFI1A + FF + MP
2)
+ F3 + (F2)
1)
+ (EM-S1INA)
Abs. Val.
MFI1A + FF + MP + F1 +
2)
F3 + (F2) + (EM-S1INA)
The reference value source is only available if an extension module with analog input is con-
nected. For information, refer to the extension module operating instructions.
The reference value source is only available if an extension module with speed sensor input is
connected. For information, refer to the extension module operating instructions.
Operating Instructions ACTIVE
Operating Instructions ACTIVE
Reference Frequency Source
475
Reference value source is the multifunctional in-
Operation Mode
put 1 in
The fixed frequency according to the
quency Change-Over 1
change-over 2
Combination of the operation modes 10 and 1.
Reference value source is the function
Motorpoti Up
Down
63.
Combination of the operation modes 20 and 1.
The frequency signals in
are evaluated as a reference value.
Combination of the operation modes 30 and 1.
The frequency signal on the digital input accord-
Operation mode
ing to
frequency input.
Combination of operation modes 1 and 32.
The KP 500 control unit is the reference value
source, with keys ▲ for increasing the frequency
and ▼ for reducing the frequency.
Combination of the operation modes 40 and 1.
Combination of the operation modes 1, 10, 40, 32
(+ analog input extension module)
Combination of the operation modes 1, 10, 40,
30, 32
(+ analog input extension module)
Combination of the operation modes 1, 10, 40, 32
(+ absolute amount speed sensor 2 (F2))
1)
(+ analog input extension module)
Combination of the operation modes 1, 10, 40,
30, 32(+ absolute amount speed sensor 2 (F2))
1)
(+ analog input extension module)
Combination of the operation modes 1, 10, 20, 32
1)
(+ analog input extension module)
Combination of the operation modes 1, 10, 20,
1)
30, 32 (+ analog input extension module)
Combination of the operation modes 1, 10, 20, 32
(+ absolute amount speed sensor 2 (F2))
(+ analog input extension module)
Combination of the operation modes 1, 10, 20,
30, 32 (+ absolute amount speed sensor 2 (F2))
1)
(+ analog input extension module)
Operation modes with signs (+/-).
475 determines
Function
452 - Analog signal.
Fixed Fre-
Fixed frequency
66 and
67 as well as the current data set.
Frequency Motorpoti
62 and
Operation Mode
496 for the repetition
1)
.
1)
.
1
.
1)
.
1)
.
1)
.
1)
.
Frequency
490
2)
2)
1)
.
2)
2)
06/07
06/07