8.8
The parameters are stored in the frequency inverter in various languages. The pa-
rameter description is displayed in the selected
VPlus,.
8.9
The parameter
resetting to the factory settings. The display of the control unit reads "dEFLt" or "rE-
SEt" and the LEDs indicate the status of the frequency inverter.
4444 - Default
Note:
88
88
Language
Language
33
0 - Deutsch
1 - English
2 - Italiano
Programming
Program(ming)
Program(ming)
34
111 - Parameter transfer
110 - Normal mode
123 - RESET
The parameters
tion
30 are not changed during the reset to the default settings (
gram(ing)
34 = 4444).
Operating Instructions ACTIVE
Operating Instructions ACTIVE
Language
Parameter description in German.
Parameter description in English.
Parameter description in Italian.
34 enables acknowledgment of a fault message and
The KP 500 control unit is prepared for parameter trans-
mission. A connected frequency inverter can receive data
from the control unit.
Reset the KP 500 control unit to standard mode.
The current error message can be acknowledged via
digital input S1IND or the software parameter. The dis-
play of the control unit reads "rESEt".
The parameters of the selected configuration are over-
written - except for a few exceptions - by the default
settings. The display of the control unit reads "dEFLt".
Control Level
Language
28,
33, e.g. by the PC program
Function
Function
Configura-
33 as well as
Pro-
06/07
06/07