Attention! In configurations 210, 211 and 230, digital input S4IND is by default set
9.4.2
The number of increments of the connected speed sensor can be adjusted via parame-
ter
according to the speed range of the application.
The maximum number of division marks S
f
To guarantee true running of the drive, an encoder signal must be evaluated at least
every 2 ms (signal frequency f = 500 Hz). The minimum number of division marks S
of the incremental encoder for a required minimum speed n
this requirement.
No.
491 Division marks, speed sensor 1
06/07
06/07
for the evaluation of a speed sensor signal (track B).
If an operation mode without sign is selected (
Operation Mode
sensor signal and can be used for other functions.
Division marks, speed sensor 1
Division marks, speed sensor 1
=150 kHz of the digital inputs S5IND (track A) and S4IND (track B).
max
S
=
150
000
Hz
max
For example:
S
=
150000
max
60
S
=
500
Hz
⋅
min
For example:
S
=
500
Hz
⋅
min
Parameter
Description
Operating Instructions ACTIVE
Operating Instructions ACTIVE
12), this input is not set for the evaluation of a speed
491. Select the division marks of the speed sensor
max
60
/ s
min
⋅
n
f
=
max
max
n
=
max
60s
Hz
⋅
=
6000
1500
/ s
min
n
A
⋅
n
min
A
min
60
s
=
1500
2
⋅
10
Operation Mode
is defined by the frequency limit of
150000 Hz
Max. speed of the motor in RPM
can be calculated from
min
=
Min. speed of the motor in RPM
=
Evaluation (1, 2, 4)
Settings
Min.
Max.
1
8192
11 or
min
Fact. sett.
1024
93
93