10. A.C. GENERATOR/STARTER CLUTCH
RIGHT CRANKCASE COVER REMOVAL
Disconnect the water hoses from the water pump
cover.
Disconnect the water hoses from the right
crankcase cover.
Remove 12 bolts attaching the right crankcase
cover and the cover.
Remove the bolt between water pump cover and
oil filter.
Remove right crankcase cover.
STATOR REMOVAL
Remove two screws attaching the pulsar coil.
Remove three A.C. generator stator bolts and the
stator.
When removing the pulsar coil and stator, be
careful not to damage them to avoid short-
circuit or broken wire.
10-3
DOWNTOWN 200i
Oil filter
Screws
Pulsar Coil
A.C. Generator Stator
Water Hose