3. INSPECTION/ADJUSTMENT
DOWNTOWN 200i
FINAL REDUCTION GEAR OIL
*
• Place the scooter on its main stand on level
ground.
Remove the transmission fluid drain bolt.
Remove the transmission fluid filler bolt, then
slowly rotate the rear wheel to drain the fluid.
Fill the transmission with the recommend fluid to
the capacity listed below.
Oil Drain Bolt
Transmission fluid type: SAE 90
Transmission fluid capacity: 0.23 L
Transmission fluid exchanging
capacity: 0.21 L
Install the transmission filler bolt and tighten it to
the specified torque.
Oil Filler Bolt
DRIVE BELT
Remove the left crankcase cover.
Inspect the drive belt for cracks or excessive wear.
Replace the drive belt with a new one if necessary
and in accordance with the Maintenance Schedule.
Drive Belt
3-8