Electronic Control Unit (Ecu) - KYMCO Downtown 200i Service Manual

13. FUEL INJECTION SYSTEM
ELECTRIC CONTROL UNIT
(ECU)
REMOVAL/INSTALLATION
● Do not disconnect or connect the ECU
connector during the ignition switch
"ON"; it may cause the ECU damaged.
● The throttle position sensor (TPS) and
idle air bypass valve (ISC) have to be
reset when throttle body, MAP, TPS,
ISC or ECU has been reinstalled.
Disconnect the ECU connector and remove
the ECU from the frame.
Installation is in the reverse order of the
removal.
DOWNTOWN 200i
13-18