KYMCO Downtown 200i Service Manual page 86

8. DRIVE AND DRIVEN PULLEYS/
V-BELT
CLUTCH/DRIVEN PULLEY
DISASSEMBLY
Hold the clutch/driven pulley assembly with the
clutch spring compressor.
Set the tool in a vise and remove the clutch drive
plate nut.
• Be sure to use a clutch spring compressor
to avoid spring damage.
Special
Clutch Spring Compressor
Fittings & Nut Wrench, 41mm
Loosen the clutch spring compressor and
disassemble the clutch/driven pulley assembly.
Remove the seal collar.
Pull out the guide roller pins and guide rollers.
Remove the movable driven face from the driven
face.
Remove the oil seal from the movable driven
face.
ASSEMBLY
8-7
E053
E033
Guide Roller
DOWNTOWN 200i
Clutch Spring Compressor
Lock Nut Wrench
Guide Roller Pin
Movable Driven Face
Oil Seal
O-ring
Clutch/Driven Pulley