Engine Oil - KYMCO Downtown 200i Service Manual

3. INSPECTION/ADJUSTMENT

ENGINE OIL

OIL LEVEL INSPECTION
Stop the engine and support the scooter upright
on the level ground.
Wait for 2～3 minutes and check the oil level
with the dipstick. Do not screw in the dipstick
when checking the oil level.
OIL CHANGE
Remove the oil drain bolt to drain the engine oil.
Install the aluminum washer and tighten the oil
drain bolt.
Torque: 2.5 kg-m
＊
• Replace the aluminum washer with a new
one if it is deformed or damaged.
Pour the recommended oil through the oil filler
hole.
OIL CAPACITY
Engine oil capacity: 1.5 L
Engine oil exchanging capacity: 1.3 L
Engine Oil Viscosity : SAE 5W50
OIL FILTER SCREEN INSPECTION
Drain the engine oil.
Remove the oil filter screen attaching the left-
under crankcase.
Clean the oil filter screen.
Install the oil filter screen and filter screen cap.
Fill the engine with recommended engine oil.
OIL FILTER REPLACEMENT
Remove the oil filler cap attaching the right-under
crankcase cover.
Oil Filter Screen
Oil Filter Cap
DOWNTOWN 200i
Dipstick
Oil Drain Bolt
3-4