Cylinder Head Removal - KYMCO Downtown 200i Service Manual

6. CYLINDER HEAD/VALVES
Remove the rocker arm with bolt as shown.
CAMSHAFT INSPECTION
Check each cam lobe for wear or damage.
Check each camshaft bearing for play or damage.
Replace the camshaft assembly with a new one if
the bearings are noisy or have excessive play.
If the surface of rocker arm is worn, check
each cam lobe for wear or damage.

CYLINDER HEAD REMOVAL

Remove the muffler.
Remove the throttle body.
Drain the coolant from the radiator and water
hose, then remove the thermostat water hose.
Remove the camshaft.
Remove the Temp/Map Sensor and intake
manifold.
Remove the bolt attaching the thermostat housing
and the thermostat housing.
Remove the cylinder head.
DOWNTOWN 200i
Camshaft
Bolt
Thermostat
Rocker Arm
Rocker Arm
6-6