8. DRIVE AND DRIVEN PULLEYS/
V-BELT
DOWNTOWN 200i
Install the weight rollers into the movable drive
face.
• The direction of all weight rolls is same. The
color side is towards to clockwise.
Ramp Plate
Install the ramp plate.
Insert the drive pulley collar into the movable
drive face.
INSPECTION
Inspect the clutch outer for wear or damage.
Measure the clutch outer I.D.
Service Limit: 153.5 mm replace if over
Check the clutch shoes for wear or damage.
Measure the clutch lining thickness.
Service Limit: 2.0 mm replace if below
Clutch Lining
8-6