Right Crankcase Cover Removal; Stator Removal; Flywheel Removal - KYMCO DINK 200 Manual

10
. A.C. GENERATOR/STARTER CLUTCH
RIGHT CRANKCASE COVER
REMOVAL
Disconnect the water hoses from the right
crankcase cover.
Remove the nine bolts attaching the right
crankcase cover and the cover.

STATOR REMOVAL

Remove the two pulser coil attaching screws
and the pulser coil.
Remove the three A.C. generator stator bolts
and the stator.
When removing the pulser coil and
stator, be careful not to damage them to
avoid shorted or broken wire.

FLYWHEEL REMOVAL

Hold the flywheel with a flywheel holder and
remove the flywheel nut.
Remove the flywheel with a flywheel puller.
10-3
Bolts
Bolts
Screws
Bolts
Pulser Coil
Flywheel Holder
Flywheel
Flywheel Puller
DINK 200
Water Outlet Hose
Water Inlet Hose
A.C. Generator Stator
Nut