6. CYLINDER HEAD/VALVES
CYLINDER HEAD INSTALLATION
Install the dowel pins and a new cylinder head
gasket.
Install the cam chain guide.
• Clean the intake valve rocker arm shaft
off any grease before installation.
Install the cylinder head.
Install the camshaft.
Install the intake valve rocker arm and the rocker
arm shafts.
CAMSHAFT INSTALLATION
Install the set plate to prevent the rocker arm shaft
from pull out.
Torque: 1.2 kgf-m (8.9 N-m)
6-9
DOWNTOWN 200i
Gasket
Cam chain guide
Nut
Bolts
Bolt
Dowel Pins
Cylinder Head
Fix plate